|
|
Oteco Gate Valves |
| |
Model 72 Gate Valve |
| |
Oteco Standard Gate Valves |
| Models |
72
and 66 |
| Sizes |
2 Inch, 3
Inch, 4 Inch, and 5 Inch |
| Pressures |
2000, 3000,
& 5000 psi |
| Service Types |
Standard,
Sour Gas, Waterflood |
| Temp.
Rating |
400° F / 240° C. |
| Connections |
Threaded,
Buttweld, Flanged, Union, and OTECO
Connector |
|
|
Oteco Gate Valve
Product Brochure |
|
|
| Model 72 Overview |
| The Model 72 gate valve
is designed for oilfield service as well
as maximum flexibility and reliability.
Whether used in your mud system,
floor and standpipe manifold, or flow
line application, the Model 72 is field
proven for easy operation, tight
shut-offs, long life, and simple, fast,
low-cost field renewal. Manufactured at
our Houston facility, each Model 72 is
rigorously tested prior to shipment from
the factory. |
| |
| Model 72
Features & Benefits |
 |
Utilization of
Body Subs allow change out of
valve connections without
changing valve body or entire
valve |
|
Full rising, one
piece forged gate and stem
displays current valve
orientation: open, partially
open, or closed |
|
Extra large
ball bearings and heavy duty stem
threads minimize torque required
for valve operation |
|
Proven
interlocking gate packing and wear plate design protects the
valve body and cap during
repeated valve opening and
closing |
|
Standard gate packing is designed for a wide
range of fluid environments |
|
Model 72 parts
are interchangeable with Cameron
type S Flex-Seal valve parts |
| |
|
|
| |
| * Model 66 Gate Valve is no
longer manufactured but service support
and replacement parts are still
available.. |
| |
|
|
| |
Model DM Gate Valve |
| |
Oteco DM Style Gate Valves |
| Models |
DM |
| Sizes |
2 Inch, 3
Inch, 4 Inch, and 5 Inch |
| Pressures |
5000
& 7500 psi |
| Service Types |
Standard, Sour Gas, Cold Service and High Pressure |
| Temp.
Rating |
-40° F/C to 250° F / 121° C. |
| Connections |
Threaded, Buttweld and Flanged |
|
|
Oteco DM
Gate Valve
Product Brochure |
|
|
|
| |
| Model DM Overview |
| The Oteco Model DM series fits the bill the low cost valve operation. Made
from high strength weldable alloys and corrosion resistant components this
water, oil and gas valve provide ease of in-line repairs. The DM valve is
offered in pressure ranges of 0-7,500 PSI (517 BAR) with standard or sour gas
trim options and 90 durometer main seals. All valves are assembled and tested in
our Hoston Texas facility. |
| |
| Model DM
Features & Benefits |
|
Corrosion resistant Gate and Stem |
|
Constructed of high strength weldable allow |
|
Flourotrel lipcup steam seals |
|
Zinc Chromate plated studs and nuts |
|
High strength steel seat inserts |
|
Extended body stud thread engagement |
|
Body and Bonnet nut clearance for closed end wrenches and sockets |
| |
|
|
| |
|
| |
|
