|
| Rig
Hardware and Equipment |
|
|
|
 |
| Chain Connectors |
 |
| OTECO chain
connectors are available to handle three
sizes/styles of roller chain. Roller
chain sizes include 1-1/4 in. to 2-1/4
in., 2-1/4 in. and all API chain, and
1-1/4 in. to 2-1/4 in. multi-width chain. |
|
 |
| Impact
Box Wrenches |
|
| OTECO offers a
complete line of forged steel impact box
wrenches. Our size offering covers rig
applications from 1-1/16 in. Nut/ 5-8 in.
Stud to 3-7/8 in. Nut/2-1/2 in. Stud. |
|
 |
| Manifold
Fittings |
|
OTECO
manufactures ten different styles of
manifold fittings in 2 in., 3 in., 4 in.,
and 5 in. with working pressures from
3,000 psi to 5,000 psi and test pressures
to 10,000 psi.
OTECO Manifold Fittings available are:
- 45º
Long Sweep Ells
- 90º
Long Sweep Ells with 2 in. outlet
- 90º
Long Sweep Ells
- Long
Sweep Full Flow Tee
- Long
Sweep Tee
- 160º
Standpipe Gooseneck
- 180º
Standpipe Gooseneck
- Long
Sweep Full Flow Cross
- Long
Sweep Y
- 160º
Standpipe Gooseneck with top
outlet
Each
fitting can be supplied with either line
pipe threads, or Schedule 160 / Schedule
XX buttweld end connections with special
connections available upon request. All
fittings are hydrostatically tested prior
to shipment and full certification can be
supplied upon request.
|
|
 |
| Oil
& Mud Guards |
|
Oil
Guards
Similar in design as the mud guards, the
OTECO Oil Guard, MG-500 is 4 ft. x 6 in.
and is designed to handle tubing sizes
from 2-3/8 in. to 3-1/2 in. The oil guard
is proven effective in saving lost oil as
well as protecting the environment. As
with the mud guard, end and side seals
are available in either neoprene or
nitrile compounds. |
| |
|
Mud
Guards
OTECO mud guards come in two models : the
MG-600 and MG-800. Our mud guards are
proven cost effective in saving the
expense of lost drilling fluids, reduced
labor for rig wash down, as well as
reducing the potential for accidents due
to slippery rig floors. The MG-600 is 6
ft. x 10-3/4 in. and can handle drill
pipe sizes from 2-3/8 in. to 5-1/2 in.
The MG-800 is 6 ft. x 16 in. The larger
cavity of the MG-800 is designed for
drill pipe sizes from 2-3/8 in. to 6-5/8
in. and can handle larger volumes of line
fluids. Both models can be supplied with
either neoprene or nitrile end and side
seals. |
|
 |
| Wireline
Equipment |
|
OTECO
manufactures wireline turnback assemblies
and components. In addition, we have
replacement rollers for BJ model code
Roliguide.
OTECO also offers complete wireline guide
units and wireline guide hanging
assemblies for most beam or angle type
derricks. If you don’t find the
hanging assembly that you require, please
inquire via e-mail, feedback, or contact
your nearest OTECO representative. |
|
 |
| Other
Rig Hardware |
|
Balancing
Straps
OTECO balancing straps keep center-latch
elevators balanced in any position making
the elevators easier to handle and
reducing fatigue. The strap attaches to
the link with a U-bolt assembly and the
twisted metal loop attaches to the
elevator handle.Tong
Pull Back Straps
OTECO tong pull-back straps act as a
rubber spring to automatically reposition
tongs to the side of the floor between
each makeup or breakout. One loop of the
tong hooks over the tong line pin at the
end of a manual tong arm. Secure the
other end loop with a mooring line to a
convenient location. The pull-back needs
only to be stretched slightly for proper
operation.
|
|
|
Back to Product Line Main Page
