| |
| Following are important
safety recommendations pertaining to the
operation of OTECO Relief Valves. |
| |
| Model RR Safety Tip |
| OTECO
recommends that the model RR manual reset
relief valve should be used in an upright
position. Before operating the unit,
ensure that proper rated piping is used
and discharged to the mud tank. Inlet and
outlet piping should be rated to the
maximum working pressure of the model RR
reset relief valve. Outlet piping should
be reinforced with clamps or brackets to
keep the model RR manual reset relief
valve secured when in operation to
release inlet pressure. |
| |
| Model PRV Safety Tip |
| Use only Genuine
OTECO Shear Pins. Substitution of nails,
hex wrenches, or other objects can result
in abnormally low or dangerously high
pressures or prevent proper operation of
the valve. By doing this the risk of
valve failure increases as does the risk
of bodily injury or death. |
| |
| |
Shear Pin Stamp
Diagram |
The shear pin #
designator stamp can be found on
the shear pin as illustrated
here. |
|
| |
|
| |
